|A weather proof door bottom seal, that is used by OEM joiners in situations where maximum weather protection is required. The multi-blade seal defies rain infiltration.|
RP86 is fitted to the square cut bottom of a door, provided there is a gap of 19-20mm prior to installation (flat sill). It is quick and easy to fit to both door and sill.
RP86 can be fitted by builders, but is primarily designed for volume joinery fabrication.
Location: Bottom of single and double butt hinged timber doors.
Min/Max Gap: Flat sills: 19mm to 20mm. Rebated sills: 14mm to 15mm.
Finish: Satin clear (silver) or bronze anodised aluminium (15µm) with anodised threshold plate (25µm).
Fixing: Screw fix. Zinc plated, cross recess head S.T. screws supplied.
Threshold plate fixing holes are pre-punched and countersunk.
Seal: RP486. Black or grey rigid and flexible UV stabilised PVC.
Sizes: 1000mm, 820mm. Threshold plate: 1660mm, 1000mm, 826mm.
Access & Mobility NZ: NZ BC Compliance Doc. D1/AS1 1.3.2.
UK/EU: Approved Document M.
Energy NCC Pt. 184.108.40.206 & J3.4.
Durability Tested to over 1,000,000 operating cycles without failure.
Insects/Vermin AS4674, 2.1.5(iv), 2.1.7.